Are you cringing over the damage to your precious car’s wheels? Worry not, because there is a quick and straightforward way to fix it. Alloy wheel refurbishment can make your wheels look good as new without spending much. If you consider opting for this service but are unsure because you are not familiar with how it works, this article will tell you what you need to know.
When to Consider Alloy Wheel Refurbishment
Getting scratches, scuffs, and other types of damage on your wheels when driving is normal, but they don’t have to be permanent. If you don’t have the time to get your wheels repaired or the budget to buy a replacement, alloy wheel refurbishment might be the solution you need. This service is a cost-effective way to get your wheels looking their best without purchasing new ones.
The Cost of the Refurbishment
When it comes to cost, there are two things you need to consider: the skills and experience of the person executing the job and the time necessary to complete the work.
A professional refurbisher should perform alloy wheel refurbishment. They need to be someone who has enough training and a high standard when it comes to doing the job. In some cases, they need to colour-match to make sure the wheel will look the same. With enough experience and skills, a refurbisher can make your wheels look new without people noticing any difference from how it initially looked.
The total cost will depend on the size and finish of the whole job. It typically starts at £60.
Given this, keep in mind that your alloy wheels’ repair cost will reflect the quality of work you will get. Also, know that it is much more budget-friendly than you think.
What to Expect During Alloy Wheel Refurbishment
Here is what you should expect:
- The refurbisher will start with a car inspection. They will note all the scuffs and scratches that they need to repair.
- They will then proceed to take off the tyres from the affected wheels. They will also remove the tyre valves and weights.
- Using a chemical stripper, they will revert the wheels back to their bare metal phase, removing the old paint.
- They will treat all the damages, and repairs will be done mechanically at the wheel preparation station.
- The wheels will be blasted to remove some of the corrosion and prepare them for adhesion of the new finish.
- Your wheels will then be heated up to 200 degrees in a curing oven. This step will open the wheels’ pores to release any trapped gas or chemicals inside it. It is a necessary step before they put on the powder coat primer.
- The colour coat is then applied to match your chosen colour or the original colour of your wheels.
- They will apply a powered clear coat and then bake it again for the final curing.
- Once the wheels cool down, they will be inspected again for final quality checks.
- Afterwards, the tyres will be refitted and balanced.
- Then, they will also ask you to check whether there is anything else they missed.
Conclusion
Why replace when you can refurbish? Now that you know what happens during alloy wheel refurbishment and how much it costs, you should now look for a company that will do a good job.
For alloy wheel refurbishment in Essex, Wicked Rims is here to the rescue. We are a professional wheel refurbishment company that can make your old wheels like new. Contact us at 07745 176 060 or 01438 369 144 to book our service today.